The Marvell community is committed to corporate social responsibility by developing low-power technologies. Driver Downloads Download the latest Marvell drivers. The desktop had to throttle back to gen. 1 PCIe speeds, the Jetson is running at full gen. Both use the ahci driver. So if there is an issue in software odds are that it is with a difference between the desktop's ahci driver and the Jetson's ahci driver (the desktop probably uses a 4.x kernel, the Jetson uses the 3.x kernel).
Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8. The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard.
France vfr scenery. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014.
Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc. On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'.
The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. Epson adjustment program l1000. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8.
The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014. Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc.
On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'. The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Computer Type: PC/Desktop System Manufacturer/Model Number: self-built mid-tower OS: Windows 10 Home x64 v1511, many others virtualized CPU: Intel Core2 Quad Q9550 Motherboard: Asus P5N-D, USB3 & SATA3 pcie cards added Memory: 8GB Kingston HyperX DDR2-800 Graphics Card: Sapphire Nitro Radeon R7 370 Sound Card: Asus Xonar D2X Monitor(s) Displays: Eizo FlexScan S1910 Hard Drives: 2x Intel SSD 180+240GB, 5x Seagate HDD 2TB, 1x WD HDD 4TB, some in RAID arrays Other Info: My another Win10 x64 systems: Lenovo Thinkpad E531 notebook, Asus EEE 1005PG netbook. 'However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards'.
The Marvell community is committed to corporate social responsibility by developing low-power technologies. Driver Downloads Download the latest Marvell drivers. The desktop had to throttle back to gen. 1 PCIe speeds, the Jetson is running at full gen. Both use the ahci driver. So if there is an issue in software odds are that it is with a difference between the desktop's ahci driver and the Jetson's ahci driver (the desktop probably uses a 4.x kernel, the Jetson uses the 3.x kernel).
Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8. The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard.
France vfr scenery. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014.
Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc. On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'.
The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. Epson adjustment program l1000. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8.
The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014. Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc.
On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'. The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Computer Type: PC/Desktop System Manufacturer/Model Number: self-built mid-tower OS: Windows 10 Home x64 v1511, many others virtualized CPU: Intel Core2 Quad Q9550 Motherboard: Asus P5N-D, USB3 & SATA3 pcie cards added Memory: 8GB Kingston HyperX DDR2-800 Graphics Card: Sapphire Nitro Radeon R7 370 Sound Card: Asus Xonar D2X Monitor(s) Displays: Eizo FlexScan S1910 Hard Drives: 2x Intel SSD 180+240GB, 5x Seagate HDD 2TB, 1x WD HDD 4TB, some in RAID arrays Other Info: My another Win10 x64 systems: Lenovo Thinkpad E531 notebook, Asus EEE 1005PG netbook. 'However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards'.
...">Marvell 88se9230 Linux Driver In Alabama Dies(09.02.2019)The Marvell community is committed to corporate social responsibility by developing low-power technologies. Driver Downloads Download the latest Marvell drivers. The desktop had to throttle back to gen. 1 PCIe speeds, the Jetson is running at full gen. Both use the ahci driver. So if there is an issue in software odds are that it is with a difference between the desktop's ahci driver and the Jetson's ahci driver (the desktop probably uses a 4.x kernel, the Jetson uses the 3.x kernel).
Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8. The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard.
France vfr scenery. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014.
Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc. On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'.
The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Marvell 92XX SATA Controller 6GB Driver for Windows 10 (x64) 1.2.0.1039-WHQL (9/5/2013 a.k.a. Epson adjustment program l1000. 6/19/2014) In Windows 10, the driver for the Marvell SATA Controller may not get installed automatically which leads us on a wild goose chase as to where to find it. Marvell's driver download page only lists this driver as for Windows Server 2008 SP2, Windows 7, and Windows 8.
The Windows 8 driver will work fine on Windows 10 but the driver at Marvell is slightly older than the driver provided here. This driver is found at EVGA's driver download page () and is for the Z87 FTW motherboard. Also, it is listed as a Windows 8/8.1 driver named 'SATA 3/6G (Non-Intel)'but works flawlessly on Windows 10. The actual driver date listed in Windows after the driver is installed is 9/5/2013, but many download sites list the driver release date as 6/9/2014. Oddly, the driver is listed as 'SATA 3/6G (Non-Intel)', which is kind of ridiculous because the only other controller besides Intel on this board is Marvell, so instead of saying 'Non-Intel' wouldn't it be just as easy to say 'Marvell'? And in fact, when you click 'Download', the file that downloads is named 'Marvell_1.2.0.1039-WHQL.zip' However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards, as it is for the Marvell 92xx SATA 6GB Controller and there is very little chance that a vendor has modified this chipset. (which would require their own driver, of course.) I had no problems with a controller not working, drives not being recognized, not utilizing the correct speed of the controller, etc.
On the contrary, the only reason I began my search for this proper driver was that I saw it as a missing driver in Device Manager and was listed as 'Other Devices > Unknown Device'. The Hardware ID was quite cryptic listed as 'SCSI/PCI.' It did not look like a normal Hardware ID. Computer Type: PC/Desktop System Manufacturer/Model Number: self-built mid-tower OS: Windows 10 Home x64 v1511, many others virtualized CPU: Intel Core2 Quad Q9550 Motherboard: Asus P5N-D, USB3 & SATA3 pcie cards added Memory: 8GB Kingston HyperX DDR2-800 Graphics Card: Sapphire Nitro Radeon R7 370 Sound Card: Asus Xonar D2X Monitor(s) Displays: Eizo FlexScan S1910 Hard Drives: 2x Intel SSD 180+240GB, 5x Seagate HDD 2TB, 1x WD HDD 4TB, some in RAID arrays Other Info: My another Win10 x64 systems: Lenovo Thinkpad E531 notebook, Asus EEE 1005PG netbook. 'However, I believe this Marvell driver will work fine on many platforms other than EVGA motherboards'.
...">Marvell 88se9230 Linux Driver In Alabama Dies(09.02.2019)