18
ноя
By combining thin layer and full depth measuring capabilities in one instrument, the RoadReader 3450 Plus is our flagship gauge in the 3400 series. With its versatility, speed, and economy the RoadReader Plus is designed to satisfy your compaction control needs at every stage of your project. Like all 3400 series gauges, the Model 3450 meets ASTM Standard Test Methods D-6938 (replaced ASTM D-2922 and ASTM D-3017 as of November 2006), D-2950, C-1040 and AASHTO T-310.
Mod Manager may be acquired exclusively via the. DAI Tools Suite Loader (and if the DAI Tools Suite Loader isn’t working, check out this thread for the a direct download link) The Tutorial on how to use the Mod Manager may be found here. About this mod. Please read my post on the forum for a quick walkthrough and how to use: loader-for-dai-tools-is-ready-by-dawnless-sky-t768.html If you encounter a problem using any of the tools in the suite, go to our forums and check if the problem has already been reported. If no, post it in the appropriate section. How to Configure Mod Manager: 1) Open Mod Manager v1.0.0.59 via the Launch button in the DAI Tools Suite. If it is the first time running the software, you will see this popup. Dai mod manager tool how to use windows 10.
1 Manual of Operation and Instruction Model 3430 Plus & 3440 Plus Surface Moisture-Density Gauge NOTE The Model 3440 Plus Surface Moisture Density Gauge can be equipped with an optional global positioning system (GPS) receiver. If such a gauge is moved a long distance between uses, the GPS system must be allowed to initialize. In some instances, initialization may take as long as 30 to 45 minutes from the time the gauge is powered on with the GPS enabled. Note also that the gauge must be positioned such that the GPS receiver can receive signals from the GPS satellites (see Appendix I for more information). If the GPS does not initialize within 45 minutes, contact your Troxler representative. Troxler Electronic Laboratories, Inc Cornwallis Rd.
Box Research Triangle Park, NC Phone: TROXLER Outside the USA: Fax: 2 Troxler gauges are protected by U.S. And foreign patents. Copyright Troxler Electronic Laboratories, Inc. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose without the express written permission of Troxler Electronic Laboratories, Inc. Fantastic is a trademark of Dow Consumer Products, Inc.
Federal Express is a registered trademark of the Federal Express Corporation. 409 is a trademark of the Clorox Company. Magnalube-G is a registered trademark of Carleton-Stuart Corporation. Microsoft, Excel, HyperTerminal, Windows, and Word are registered trademarks of Microsoft Corporation. WD-40 is a registered trademark of the WD-40 Company.
PN July 2009 Edition 1.2 ii 3 TROXLER SERVICE CENTERS Troxler Corporate Headquarters 3008 Cornwallis Road P.O. Box Research Triangle Park, NC Phone: TROXLER ( ) Outside the U.S.A.: Fax: Web: Technical Support Phone: TROXLER ( ) Florida Service Center 2376 Forsyth Road Orlando, FL Fax: Texas Service Center 2016 East Randol Mill Road Suite 406 Arlington, TX Fax: Illinois Service Center 1430 Brook Drive Downers Grove, IL Fax: Northern California Service Center Sanders Drive, Suite 7 Rancho Cordova, CA Fax: Troxler European Subsidiary Troxler Electronics GmbH Gilchinger Strasse 33 D Alling nr. Munich, Germany Phone: Fax: NOTE To locate an independent, Troxler-authorized service partner near you, call TROXLER ( ). Model 3430 Plus & 3440 Plus iii 4 HOW TO USE THIS MANUAL Congratulations on the purchase of a Troxler Model 3430 Plus or 3440 Plus Surface Moisture-Density Gauge. Troxler continues the proven technology of its 3400 Series surface moisture-density gauges with the Troxler Model 3430 Plus and 3440 Plus. The Model 3430 Plus & 3440 Plus Manual of Operation and Instruction contains information on safely using this gauge.
Also included in this manual are safety warnings, gauge setup, troubleshooting, and general maintenance. NOTE Before operating the gauge, read this manual carefully. If you do not completely understand the sections that cover radiation safety, contact your company radiation safety officer (RSO) or the nearest Troxler representative. Iv 5 CONVENTIONS USED IN THIS MANUAL Throughout this manual, symbols and special formatting are used to reveal the purpose of the text as follows: WARNING Indicates conditions or procedures that, if not followed correctly, may cause personal injury. CAUTION Indicates conditions or procedures that, if not followed correctly, may cause equipment damage.
By combining thin layer and full depth measuring capabilities in one instrument, the RoadReader 3450 Plus is our flagship gauge in the 3400 series. With its versatility, speed, and economy the RoadReader Plus is designed to satisfy your compaction control needs at every stage of your project. Like all 3400 series gauges, the Model 3450 meets ASTM Standard Test Methods D-6938 (replaced ASTM D-2922 and ASTM D-3017 as of November 2006), D-2950, C-1040 and AASHTO T-310.
Mod Manager may be acquired exclusively via the. DAI Tools Suite Loader (and if the DAI Tools Suite Loader isn’t working, check out this thread for the a direct download link) The Tutorial on how to use the Mod Manager may be found here. About this mod. Please read my post on the forum for a quick walkthrough and how to use: loader-for-dai-tools-is-ready-by-dawnless-sky-t768.html If you encounter a problem using any of the tools in the suite, go to our forums and check if the problem has already been reported. If no, post it in the appropriate section. How to Configure Mod Manager: 1) Open Mod Manager v1.0.0.59 via the Launch button in the DAI Tools Suite. If it is the first time running the software, you will see this popup. Dai mod manager tool how to use windows 10.
1 Manual of Operation and Instruction Model 3430 Plus & 3440 Plus Surface Moisture-Density Gauge NOTE The Model 3440 Plus Surface Moisture Density Gauge can be equipped with an optional global positioning system (GPS) receiver. If such a gauge is moved a long distance between uses, the GPS system must be allowed to initialize. In some instances, initialization may take as long as 30 to 45 minutes from the time the gauge is powered on with the GPS enabled. Note also that the gauge must be positioned such that the GPS receiver can receive signals from the GPS satellites (see Appendix I for more information). If the GPS does not initialize within 45 minutes, contact your Troxler representative. Troxler Electronic Laboratories, Inc Cornwallis Rd.
Box Research Triangle Park, NC Phone: TROXLER Outside the USA: Fax: 2 Troxler gauges are protected by U.S. And foreign patents. Copyright Troxler Electronic Laboratories, Inc. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose without the express written permission of Troxler Electronic Laboratories, Inc. Fantastic is a trademark of Dow Consumer Products, Inc.
Federal Express is a registered trademark of the Federal Express Corporation. 409 is a trademark of the Clorox Company. Magnalube-G is a registered trademark of Carleton-Stuart Corporation. Microsoft, Excel, HyperTerminal, Windows, and Word are registered trademarks of Microsoft Corporation. WD-40 is a registered trademark of the WD-40 Company.
PN July 2009 Edition 1.2 ii 3 TROXLER SERVICE CENTERS Troxler Corporate Headquarters 3008 Cornwallis Road P.O. Box Research Triangle Park, NC Phone: TROXLER ( ) Outside the U.S.A.: Fax: Web: Technical Support Phone: TROXLER ( ) Florida Service Center 2376 Forsyth Road Orlando, FL Fax: Texas Service Center 2016 East Randol Mill Road Suite 406 Arlington, TX Fax: Illinois Service Center 1430 Brook Drive Downers Grove, IL Fax: Northern California Service Center Sanders Drive, Suite 7 Rancho Cordova, CA Fax: Troxler European Subsidiary Troxler Electronics GmbH Gilchinger Strasse 33 D Alling nr. Munich, Germany Phone: Fax: NOTE To locate an independent, Troxler-authorized service partner near you, call TROXLER ( ). Model 3430 Plus & 3440 Plus iii 4 HOW TO USE THIS MANUAL Congratulations on the purchase of a Troxler Model 3430 Plus or 3440 Plus Surface Moisture-Density Gauge. Troxler continues the proven technology of its 3400 Series surface moisture-density gauges with the Troxler Model 3430 Plus and 3440 Plus. The Model 3430 Plus & 3440 Plus Manual of Operation and Instruction contains information on safely using this gauge.
Also included in this manual are safety warnings, gauge setup, troubleshooting, and general maintenance. NOTE Before operating the gauge, read this manual carefully. If you do not completely understand the sections that cover radiation safety, contact your company radiation safety officer (RSO) or the nearest Troxler representative. Iv 5 CONVENTIONS USED IN THIS MANUAL Throughout this manual, symbols and special formatting are used to reveal the purpose of the text as follows: WARNING Indicates conditions or procedures that, if not followed correctly, may cause personal injury. CAUTION Indicates conditions or procedures that, if not followed correctly, may cause equipment damage.
...">Manual Densimetro Troxler 3440 Plus(18.11.2018)
By combining thin layer and full depth measuring capabilities in one instrument, the RoadReader 3450 Plus is our flagship gauge in the 3400 series. With its versatility, speed, and economy the RoadReader Plus is designed to satisfy your compaction control needs at every stage of your project. Like all 3400 series gauges, the Model 3450 meets ASTM Standard Test Methods D-6938 (replaced ASTM D-2922 and ASTM D-3017 as of November 2006), D-2950, C-1040 and AASHTO T-310.
Mod Manager may be acquired exclusively via the. DAI Tools Suite Loader (and if the DAI Tools Suite Loader isn’t working, check out this thread for the a direct download link) The Tutorial on how to use the Mod Manager may be found here. About this mod. Please read my post on the forum for a quick walkthrough and how to use: loader-for-dai-tools-is-ready-by-dawnless-sky-t768.html If you encounter a problem using any of the tools in the suite, go to our forums and check if the problem has already been reported. If no, post it in the appropriate section. How to Configure Mod Manager: 1) Open Mod Manager v1.0.0.59 via the Launch button in the DAI Tools Suite. If it is the first time running the software, you will see this popup. Dai mod manager tool how to use windows 10.
1 Manual of Operation and Instruction Model 3430 Plus & 3440 Plus Surface Moisture-Density Gauge NOTE The Model 3440 Plus Surface Moisture Density Gauge can be equipped with an optional global positioning system (GPS) receiver. If such a gauge is moved a long distance between uses, the GPS system must be allowed to initialize. In some instances, initialization may take as long as 30 to 45 minutes from the time the gauge is powered on with the GPS enabled. Note also that the gauge must be positioned such that the GPS receiver can receive signals from the GPS satellites (see Appendix I for more information). If the GPS does not initialize within 45 minutes, contact your Troxler representative. Troxler Electronic Laboratories, Inc Cornwallis Rd.
Box Research Triangle Park, NC Phone: TROXLER Outside the USA: Fax: 2 Troxler gauges are protected by U.S. And foreign patents. Copyright Troxler Electronic Laboratories, Inc. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose without the express written permission of Troxler Electronic Laboratories, Inc. Fantastic is a trademark of Dow Consumer Products, Inc.
Federal Express is a registered trademark of the Federal Express Corporation. 409 is a trademark of the Clorox Company. Magnalube-G is a registered trademark of Carleton-Stuart Corporation. Microsoft, Excel, HyperTerminal, Windows, and Word are registered trademarks of Microsoft Corporation. WD-40 is a registered trademark of the WD-40 Company.
PN July 2009 Edition 1.2 ii 3 TROXLER SERVICE CENTERS Troxler Corporate Headquarters 3008 Cornwallis Road P.O. Box Research Triangle Park, NC Phone: TROXLER ( ) Outside the U.S.A.: Fax: Web: Technical Support Phone: TROXLER ( ) Florida Service Center 2376 Forsyth Road Orlando, FL Fax: Texas Service Center 2016 East Randol Mill Road Suite 406 Arlington, TX Fax: Illinois Service Center 1430 Brook Drive Downers Grove, IL Fax: Northern California Service Center Sanders Drive, Suite 7 Rancho Cordova, CA Fax: Troxler European Subsidiary Troxler Electronics GmbH Gilchinger Strasse 33 D Alling nr. Munich, Germany Phone: Fax: NOTE To locate an independent, Troxler-authorized service partner near you, call TROXLER ( ). Model 3430 Plus & 3440 Plus iii 4 HOW TO USE THIS MANUAL Congratulations on the purchase of a Troxler Model 3430 Plus or 3440 Plus Surface Moisture-Density Gauge. Troxler continues the proven technology of its 3400 Series surface moisture-density gauges with the Troxler Model 3430 Plus and 3440 Plus. The Model 3430 Plus & 3440 Plus Manual of Operation and Instruction contains information on safely using this gauge.
Also included in this manual are safety warnings, gauge setup, troubleshooting, and general maintenance. NOTE Before operating the gauge, read this manual carefully. If you do not completely understand the sections that cover radiation safety, contact your company radiation safety officer (RSO) or the nearest Troxler representative. Iv 5 CONVENTIONS USED IN THIS MANUAL Throughout this manual, symbols and special formatting are used to reveal the purpose of the text as follows: WARNING Indicates conditions or procedures that, if not followed correctly, may cause personal injury. CAUTION Indicates conditions or procedures that, if not followed correctly, may cause equipment damage.
...">Manual Densimetro Troxler 3440 Plus(18.11.2018)